Breast Augmentatation & Breast Implant Information Web - Frequently Asked Questions

Implant Valves - Failure? Leaks? Most saline implants have an internal self-sealing valve, meaning that it closes automatically when the fill tube is removed. The most common type is called a diaphragm valve; other types include the leaf valve and the kink valve. If you have seen a saline implant at your doctor's office you may have noticed a little plug on a strap directly over the valve site. This looks a bit like the plug on a child's pool toy but does not serve the same purpose. This little plug does not hold the saline in (that is the job of the valve) but instead it covers the valve site to reduce the risk that tissue will grow into the valve and compromise its integrity. The doctor has to push this little plug into place when the implant is filled but, as mentioned above, the valve itself seals automatically. Valve failure can be the cause of saline implant deflation but this occurs relatively rarely, approximately 1% of the time. When saline implants fail, i.e. deflate, the cause 99% of the time is a hole or rip in the implant shell caused by wear and tear over time. This information contributed by Ed Pechter, M.D., Valencia, CA Updated: 01/17/2007

Home | Resources | Find a Plastic Surgeon Discussions | Experiences | Photos | FAQs | Online Poll Chat | Site Map | Search Site
		Important - Website Usage Agreement - Please read Copyright ©1999 - 2008 by CompuMedical L.L.C. and ImplantInfo All rights reserved. Breast Augmentation and Implant Information Website by Nicole and ImplantInfo.com are registered trade names of CompuMedical, L.L.C. and are protected by Federal trademark laws. Questions or comments? Send Feedback to: nicole@implantinfo.com Technical Issues or Problems? Mail: webadmin@implantinfo.com